Chemical products for repair and refitting
Italkem collaborated with some of the world’s most important shipbuilding companies such as Carnival Cruise Line, carefully following the marine industry, refining all process cycles in this field. Using the extensive knowledge acquired during these important experiences, Italkem is able to present its new MARINE DIVISION, which may already include a wide range of products:
CONCRETE AND RESINOUS FOUNDATIONS, PRIMERS, ADHESIVES / SEALANTS, FINISHINGS, ANTI-VIBRATION AND ANTI-CONDENSATION SLEEVES
CONCRETE AND RESINOUS FOUNDATIONS, PRIMERS, ADHESIVES / SEALANTS, FINISHINGS, ANTI-VIBRATION AND ANTI-CONDENSATION SLEEVES
New products
Products
show more >>
NAVIFLEX STONE
Water-based screed coat
Water-based screed coat
Water-based screed coat for marine use, consisting of a special mixture of cements and selected fillers with controlled particle size, with the addition of resins and cellulose, characterized by high mechanical strength and good elasticity. NAVIFLEX STONE provides excellent strength and workability. Also available in waterproof version for humid rooms such as kitchens, engine rooms, bathrooms etc.
(Using in Floating Floor cycle). For thicknesses from 0 to 30 mm.
(Using in Floating Floor cycle). For thicknesses from 0 to 30 mm.
NAVIFLEX STONE / F
Self-levelling powder
Self-levelling powder
Self-levelling powder constituted by a special mixture of cements and selected fillers in controlled particle size, additioned by resins and celluloses, characterized by high mechanical strength and good elasticity. For thicknesses from 0 to 30 mm. Suitable to prepare NAVIFLEX STONE surface to the laying with PVC, amtico, rubber, etc.
NAVIFLEX
Two component epoxy-polyurethane resin
Two component epoxy-polyurethane resin
High quality, innovative two component epoxy-polyurethane resin. Self levelling, pourable. with high power grip and elasticity is resistant to acid, alkali, solvents and solvent wax removing as well. It's also equipped with anti-slip effect even without further dusting, given its featured high elasticity. NAVIFLEX does not need polyurethane finishing. Available in all RAL colourations.
EPOXI PRIMER
Two-component epoxy-polyamide primer
Two-component epoxy-polyamide primer
Pre-dosed, two-component epoxy-polyamide primer for metals, easy to apply. It is diluted with special solvents which confer good workability and pot life to the product. Excellent grip on any surface granted by the use of particular adhesion promoters and good workability even in very low or excessively high climatic conditions. Apply EPOXI PRIMER also on surfaces with restricted presence of calamine.
NAVIFLEX /A
Two-component epoxy-polyurethane adhesive
Two-component epoxy-polyurethane adhesive
Two-component epoxy-polyurethane adhesive specific for bonding, both indoor and outdoor, civil and sports rubber flooring, textile, PVC, amtico flooring, linoleum, polystyrene, polyurethane, asbestos cement, wood, laminates, stone, marble, ceramics, sheet metal, aluminium, etc. NAVIFLEX grants excellent elasticity and grip power, through the use of innovative adhesion promoters and the high percentage of polyurethane resin inserted in the formulation, particularly suitable for use even on non-absorbent subs
NAVIFLEX PU/F
Polyurethane finishing
Polyurethane finishing
Two-component, high strength, solvent based polyurethane finishing, available in glossy, semi-gloss, satin and matte shades. The product can be supplied on request in RAL or transparent version.
Mixing component A with component B a fluid, easy to apply fluid product is obtained. Once hardened, it forms a film with excellent resistance to abrasion, cleaning agents and UV rays. (Also used in false teak cycle in POLISH MARINE substitution).
Mixing component A with component B a fluid, easy to apply fluid product is obtained. Once hardened, it forms a film with excellent resistance to abrasion, cleaning agents and UV rays. (Also used in false teak cycle in POLISH MARINE substitution).
NAVIFLEX PU/V
Two-component polyurethane product
Two-component polyurethane product
Modified two-component polyurethane product, characterized by excellent elasticity, toughness and workability. Suitable for soundproofing and ANTI-vibration treatments of floors, walls and ceilings. Particularly suitable as anti-condensation. Is applied indifferently on cementitious substrates, steel, iron, or wood without the use of grip primers.
NB: the product has been approved for use in high-speed trains.
NB: the product has been approved for use in high-speed trains.
NAVIFLEX - F
Cementitious lightweight self-leveling
Cementitious lightweight self-leveling
Self-leveling powder constituted by a special mixture of cements and selected fillers in controlled particle size, additioned by resins and celluloses, characterized by high mechanical strength and good elasticity. Characteristics: for thicknesses from 2 to 30 mm.
ACCELERATING ADDITIVE
Accelerating powder additive for NAVIFLEX FIBRO
Accelerating powder additive for NAVIFLEX FIBRO
Accelerating aditive that allows to speed up the drying of our leveling NaviFlex FIBRO even in adverse weather conditions.We recommend that you carefully follow our leaflet and consult our technical department.
RETARDANT ADDITIVE
Retardant additive powder
Retardant additive powder
Retardant additive powder NaviFlex FIBRO to be used carefully following our technical and after consultation with our technical department.
NAVIFLEX PU
Polyurethanic modified selflevelling resin
Polyurethanic modified selflevelling resin
Two–component, hypoallergenic, resinous coating for thickness up to 8.7 mm., self-leveling and pourable, NAVIFLEX PU is equipped with a very good grip and high elasticity. The product is available both in floor and wall version (the wall version is more thixotropic). Being characterized by excellent workability, flexibility and quick drying, NAVIFLEX PU allows to finish very large areas in a short time and gives access to the places in a very short time. Characteristics:water and solvent free
NAVIFLEX PU/A
polyurethane hypoallergenic adhesive.
polyurethane hypoallergenic adhesive.
Two-component epoxy-polyurethane adhesive specific for bonding, both indoor and outdoor,civil and sports rubber flooring, textile, PVC, Amtico flooring, linoleum, polystyrene, polyurethane,fiber cement, wood, laminates, stone, marble, ceramics, sheet metal, aluminum, etc.. NaviFlex has excellent elasticity and cling to power, thanks to the use of innovative adhesion promoters and the high percentage of polyurethane resin inserted in the formulation,particularly suitable for use even on non-absorbent substra
NAVYCRIL G
Adhesive based on modified acrylic rubber
Adhesive based on modified acrylic rubber
Onecomponent adhesive based on acrylic resins in water dispersion for bonding floor coverings,rubber,PVC,linoleum and vinyl walls. For internal use only. Features: one component product in aqueous phase
NAVYCRYL M
Adhesive for textile coatings
Adhesive for textile coatings
One-component adhesive based on acrylic resins in water dispersion for bonding textile floor coverings,carpets, needle felt in general. For internal use only. Characteristics: Product component in aqueous phase.
Downloads
Marine Brochure
Video