Marco S.p.A.

Compact electromagnetic horn with
stainless steel trumpet, base and
membrane. Integrated cable.

Compact oil change electronic systems for fixed vehicles installations. Conceived for oil fill and drain operations for all on-board. Their electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. The system automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. Easy to operate and carry.

Self-priming electric vane pump with integrated bypass valve. Aluminium body. Two options quick-fit connection for 25mm pipe. Rotor and vanes made of resin. Handle fitted case with On/Off switch and battery clips. Brush holder with EMI filter. Main applications: diesel, oil and antifreeze refuelling.

Approved signalling whistle complete with
white plated horn Ø 200mm. New Italian
design base. With electric compressor and mounting
accessories. Meets COLREG 1972 IMO class IV
regulations. Approvals: RINA, LLOYD’S REGISTER
MCA, BUREAU VERITAS and NMMA.

Self-priming electric pump with special impeller for
prolonged service, suitable for fresh and salt water,
for intermittent use. The internal brush holder, with EMI
filter included, protects the electric motor from corrosion
especially in sea environment. When using the pump with
an external tube the flow rate increases by 3 l/min. Main
application as a bilge pump.

Electromagnetic horn for small boats. High
impact ASA material casing and stainless
steel AISI 304 mounting bracket for easy installation.
Its acoustic power and improved performance
is complemented by aggressive, compact and
streamlined design features. Improved water
drainage system.

Enclosure type electropneumatic horn for
boats. A great innovation is the integrated
compressor with horn, enabling immediate
sound output when pressing the push button.
No air hosing is therefore required. ASA grille
and steel bracket. Typically marine low tone and
extraordinary powerful sound. Rapid enclosure
type installation. Suitable for commercial boats,
ferries, yachts under 12 meters, sea dredges
and rubber dinghies

Self-priming automatic pump with electronic pressure
system. 12/24V universal voltage and check valve.
Nickel-plated brass body. Main applications: fresh water
pressure systems and shower kits on yachts, rubber dinghies,
sailing boats.

Self-priming water pressure system with two connected pumps with electronic control and universal voltage. Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device. Available in 2,5 bars or HIGH PRESSURE 3,5 bars.

Self-priming automatic pump with electronic
pressure system. 12/24V universal voltage
and check valve. Nickel-plated brass body. Main
applications: fresh water pressure systems and
shower kits on yachts, rubber dinghies, sailing
boats. Available in 2,5 bars or HIGH PRESSURE 3,5 bars.

Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.

Self-priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.
AVAILABLE IN 230V or 400V.

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR.
AVAILABLE IN 230V or 400V.